Marginal Fit Evaluation Trough Micro-CT Technology of Pressed vs Milled Ceramic Inlays

Manole, Marius; Berece, Cristian; Florea, Adrian; Burde, Alexandru Victor; Sinescu, Cosmin; Negrutiu, Meda Lavinia; Szuhanek, Camelia; Baciu, Sorana

Marius Manole, Cristian Berece, Adrian Florea, Alexandru Victor Burde, Cosmin Sinescu, Meda Lavinia Negrutiu, Camelia Szuhanek, Sorana Baciu

Marginal Fit Evaluation Trough Micro-CT Technology of Pressed vs Milled Ceramic Inlays

Abstract:

The goal of the present study is to compare the marginal fit using microCT of ceramic inlays obtained using two different technologies: pressing technique (lithium disilicate) and milling technique (milled leucite glass-ceramic). After extraction of four caries-free mandibular first molars, first class inlay cavities were prepared. For each tooth two inlays were manufactured- one by using pressed lithium disilicate (Emax) (n=4) and one by using milled leucite glass-ceramic (n=4). The marginal gap was analyzed circumferentially at the occlusal margin using a table-top Bruker micro CT, by measuring the distance at the occlusal limit of the cavities, between the restoration and the tooth in several points for every surface of each tooth before cementing. Data were analyzed statistically using One -way ANOVA with Tukey’s Multiple Comparison Test performed using 5.00 for Windows (GraphPad Prism 5.00 Software, San Diego, California USA). When the marginal gaps of the inlays made out of different materials on the same tooth were compared, only one result had no statistical significance. The program expressed also results by comparing the gaps of pressed vs milled restorations on different teeth. 11 out of 16 results had statistical significance. Although statistical significance between the two studied materials, we can conclude that both used materials offer a good marginal adaptation within the acceptable limits. By summing up the gathered data we can conclude that the milled ceramic shows a better marginal fit than the pressed ceramic.

Keywords:
marginal adaptation; pressed ceramic inlay; milled ceramic inlay; MicroCT

Issue: 2017, Volume 68, Issue 8

Pages: 1919-1922

Publication date: 2017/9/15

https://doi.org/10.37358/RC.17.8.5791

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
MANOLE, M., BERECE, C., FLOREA, A., BURDE, A.V., SINESCU, C., NEGRUTIU, M.L., SZUHANEK, C., BACIU, S., Marginal Fit Evaluation Trough Micro-CT Technology of Pressed vs Milled Ceramic Inlays, Rev. Chim., 68(8), 2017, 1919-1922.

Vancouver
Manole M, Berece C, Florea A, Burde AV, Sinescu C, Negrutiu ML, Szuhanek C, Baciu S. Marginal Fit Evaluation Trough Micro-CT Technology of Pressed vs Milled Ceramic Inlays. Rev. Chim.[internet]. 2017 Aug;68(8):1919-1922. Available from: https://doi.org/10.37358/RC.17.8.5791

APA 6th edition
Manole, M., Berece, C., Florea, A., Burde, A.V., Sinescu, C., Negrutiu, M.L., Szuhanek, C. & Baciu, S. (2017). Marginal Fit Evaluation Trough Micro-CT Technology of Pressed vs Milled Ceramic Inlays. Revista de Chimie, 68(8), 1919-1922. https://doi.org/10.37358/RC.17.8.5791

Harvard
Manole, M., Berece, C., Florea, A., Burde, A.V., Sinescu, C., Negrutiu, M.L., Szuhanek, C., Baciu, S. (2017). 'Marginal Fit Evaluation Trough Micro-CT Technology of Pressed vs Milled Ceramic Inlays', Revista de Chimie, 68(8), pp. 1919-1922. https://doi.org/10.37358/RC.17.8.5791

IEEE
M. Manole, C. Berece, A. Florea, A.V. Burde, C. Sinescu, M.L. Negrutiu, C. Szuhanek, S. Baciu, "Marginal Fit Evaluation Trough Micro-CT Technology of Pressed vs Milled Ceramic Inlays". Revista de Chimie, vol. 68, no. 8, pp. 1919-1922, 2017. [online]. https://doi.org/10.37358/RC.17.8.5791

Text
Marius Manole, Cristian Berece, Adrian Florea, Alexandru Victor Burde, Cosmin Sinescu, Meda Lavinia Negrutiu, Camelia Szuhanek, Sorana Baciu,
Marginal Fit Evaluation Trough Micro-CT Technology of Pressed vs Milled Ceramic Inlays,
Revista de Chimie,
Volume 68, Issue 8,
2017,
Pages 1919-1922,
ISSN 2668-8212,
https://doi.org/10.37358/RC.17.8.5791.
(https://revistadechimie.ro/Articles.asp?ID=5791)
Keywords: marginal adaptation; pressed ceramic inlay; milled ceramic inlay; MicroCT

RIS
TY - JOUR
T1 - Marginal Fit Evaluation Trough Micro-CT Technology of Pressed vs Milled Ceramic Inlays
A1 - Manole, Marius
A2 - Berece, Cristian
A3 - Florea, Adrian
A4 - Burde, Alexandru Victor
A5 - Sinescu, Cosmin
A6 - Negrutiu, Meda Lavinia
A7 - Szuhanek, Camelia
A8 - Baciu, Sorana
JF - Revista de Chimie
JO - Rev. Chim.
PB - Revista de Chimie SRL
SN - 2668-8212
Y1 - 2017
VL - 68
IS - 8
SP - 1919
EP - 1922
UR - https://doi.org/10.37358/RC.17.8.5791
KW - marginal adaptation
KW - pressed ceramic inlay
KW - milled ceramic inlay
KW - MicroCT
ER -

BibTex
@article{RevCh2017P1919,
author = {Manole Marius and Berece Cristian and Florea Adrian and Burde Alexandru Victor and Sinescu Cosmin and Negrutiu Meda Lavinia and Szuhanek Camelia and Baciu Sorana},
title = {Marginal Fit Evaluation Trough Micro-CT Technology of Pressed vs Milled Ceramic Inlays},
journal = {Revista de Chimie},
volume = {68},
number = {8},
pages = {1919-1922},
year = {2017},
issn = {2668-8212},
doi = {https://doi.org/10.37358/RC.17.8.5791},
url = {https://revistadechimie.ro/Articles.asp?ID=5791}
}

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template

* Ethical Statement

* Paper Submission

Ghidul Autorului (ro)

Open Access & Archiving Policy

Search Authors

LATEST NEWS
	NUMAR OMAGIAL PETRU PONI.. detalii
	Revista de Chimie - 70 de ani de aparitie neintrerupta.. detalii
	English-Romanian Dictionary for Mechanical Engineering (download pdf)