Could the Old Poly(methylmethacrylate) Face Arrising Challanges of New Advanced Technologies for Dental Prosthesis Manufacturing?

Totu, Eugenia Eftimie; Cristache, Corina Marilena

Eugenia Eftimie Totu, Corina Marilena Cristache

Could the Old Poly(methylmethacrylate) Face Arrising Challanges of New Advanced Technologies for Dental Prosthesis Manufacturing?

Abstract:

The biocompatibility, relatively low cost and excellent aesthetic appearance of polymer Poly(methyl methacrylate) (PMMA) makes it the material of choice for fabricating partially and complete dentures. Nowadays the emerging 3D printing technique imposed itself as reliable solution for obtaining dental devices. However, extensive usage of such technique is still limited due to the materials available. Despite PMMA’s drawbacks, mainly related to bacterial contamination, wear and mechanical failures, composite polymeric matrix has issued high interest lately. An important improvement in basic material properties have been achieved due to the inclusion of nanosystems, either nanoparticles or nanotubes. The newly shown versatility of reinforced PMMA sustains it as the best alternative for stereolithography (3D printing) technique. This paper highlights the improvements of PMMA by adding different type of nanofillers. Therefore, prospective randomized clinical in vivo studies with the use of biocompatible tested modified filled PMMA and modern technologies should be performed.

Keywords:
PMMA; complete denture; Nanofillers; 3D printing

Issue: 2017, Volume 68, Issue 9

Pages: 2102-2107

Publication date: 2017/10/15

https://doi.org/10.37358/RC.17.9.5832

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
TOTU, E.E., CRISTACHE, C.M., Could the Old Poly(methylmethacrylate) Face Arrising Challanges of New Advanced Technologies for Dental Prosthesis Manufacturing?, Rev. Chim., 68(9), 2017, 2102-2107.

Vancouver
Totu EE, Cristache CM. Could the Old Poly(methylmethacrylate) Face Arrising Challanges of New Advanced Technologies for Dental Prosthesis Manufacturing?. Rev. Chim.[internet]. 2017 Sep;68(9):2102-2107. Available from: https://doi.org/10.37358/RC.17.9.5832

APA 6th edition
Totu, E.E., Cristache, C.M. (2017). Could the Old Poly(methylmethacrylate) Face Arrising Challanges of New Advanced Technologies for Dental Prosthesis Manufacturing?. Revista de Chimie, 68(9), 2102-2107. https://doi.org/10.37358/RC.17.9.5832

Harvard
Totu, E.E., Cristache, C.M. (2017). 'Could the Old Poly(methylmethacrylate) Face Arrising Challanges of New Advanced Technologies for Dental Prosthesis Manufacturing?', Revista de Chimie, 68(9), pp. 2102-2107. https://doi.org/10.37358/RC.17.9.5832

IEEE
E.E. Totu, C.M. Cristache, "Could the Old Poly(methylmethacrylate) Face Arrising Challanges of New Advanced Technologies for Dental Prosthesis Manufacturing?". Revista de Chimie, vol. 68, no. 9, pp. 2102-2107, 2017. [online]. https://doi.org/10.37358/RC.17.9.5832

Text
Eugenia Eftimie Totu, Corina Marilena Cristache,
Could the Old Poly(methylmethacrylate) Face Arrising Challanges of New Advanced Technologies for Dental Prosthesis Manufacturing?,
Revista de Chimie,
Volume 68, Issue 9,
2017,
Pages 2102-2107,
ISSN 2668-8212,
https://doi.org/10.37358/RC.17.9.5832.
(https://revistadechimie.ro/Articles.asp?ID=5832)
Keywords: PMMA; complete denture; Nanofillers; 3D printing

RIS
TY - JOUR
T1 - Could the Old Poly(methylmethacrylate) Face Arrising Challanges of New Advanced Technologies for Dental Prosthesis Manufacturing?
A1 - Totu, Eugenia Eftimie
A2 - Cristache, Corina Marilena
JF - Revista de Chimie
JO - Rev. Chim.
PB - Revista de Chimie SRL
SN - 2668-8212
Y1 - 2017
VL - 68
IS - 9
SP - 2102
EP - 2107
UR - https://doi.org/10.37358/RC.17.9.5832
KW - PMMA
KW - complete denture
KW - Nanofillers
KW - 3D printing
ER -

BibTex
@article{RevCh2017P2102,
author = {Totu Eugenia Eftimie and Cristache Corina Marilena},
title = {Could the Old Poly(methylmethacrylate) Face Arrising Challanges of New Advanced Technologies for Dental Prosthesis Manufacturing?},
journal = {Revista de Chimie},
volume = {68},
number = {9},
pages = {2102-2107},
year = {2017},
issn = {2668-8212},
doi = {https://doi.org/10.37358/RC.17.9.5832},
url = {https://revistadechimie.ro/Articles.asp?ID=5832}
}

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template

* Ethical Statement

* Paper Submission

Ghidul Autorului (ro)

Open Access & Archiving Policy

Search Authors

LATEST NEWS
	NUMAR OMAGIAL PETRU PONI.. detalii
	Revista de Chimie - 70 de ani de aparitie neintrerupta.. detalii
	English-Romanian Dictionary for Mechanical Engineering (download pdf)