Influence of the Bone Cements Processing on the Mechanical Properties in Cranioplasty

Rivis, Mircea; Pricop, Marius; Talpos, S.; Ciocoiu, Robert; Antoniac, Iulian; Gheorghita, Daniela; Trante, Octavian; Moldovan, Horatiu; Grigorescu, Gabriel; Seceleanu, Vicentiu; Mohan, Aurel; Niculescu, Serban Talpos

Mircea Rivis, Marius Pricop, S. Talpos, Robert Ciocoiu, Iulian Antoniac, Daniela Gheorghita, Octavian Trante, Horatiu Moldovan, Gabriel Grigorescu, Vicentiu Seceleanu, Aurel Mohan, Serban Talpos Niculescu

Influence of the Bone Cements Processing on the Mechanical Properties in Cranioplasty

Abstract:

The aim of this study is to observe the time of mixing influence on the properties of commercially available PMMA bone cement, widely used in cranioplasty. The studied bone cement is provided in the form of a solid powder (the copolymer) and a liquid monomer. The increase of the mixing phase duration and the use of two mixing methods (manual and mechanical) effect on surface and mechanical characteristics were studied. The samples were prepared as if in the operation room. Surface characteristics were studied by means of contact angle measurements, morphology by scanning electron microscopy (SEM) and mechanical characteristics determined by flexural tests in a three point bending configuration. The conclusion of this study is that by using a mechanical mixing method and increasing mixing time higher flexural strength can be achieved by reducing pore content within bone cement.

Keywords:
bone cement; PMMA; flexural strength; surface wetting

Issue: 2018, Volume 69, Issue 4

Pages: 990-993

Publication date: 2018/5/15

https://doi.org/10.37358/RC.18.4.6243

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
RIVIS, M., PRICOP, M., TALPOS, S., CIOCOIU, R., ANTONIAC, I., GHEORGHITA, D., TRANTE, O., MOLDOVAN, H., GRIGORESCU, G., SECELEANU, V., MOHAN, A., NICULESCU, S.T., Influence of the Bone Cements Processing on the Mechanical Properties in Cranioplasty, Rev. Chim., 69(4), 2018, 990-993.

Vancouver
Rivis M, Pricop M, Talpos S, Ciocoiu R, Antoniac I, Gheorghita D, Trante O, Moldovan H, Grigorescu G, Seceleanu V, Mohan A, Niculescu ST. Influence of the Bone Cements Processing on the Mechanical Properties in Cranioplasty. Rev. Chim.[internet]. 2018 Apr;69(4):990-993. Available from: https://doi.org/10.37358/RC.18.4.6243

APA 6th edition
Rivis, M., Pricop, M., Talpos, S., Ciocoiu, R., Antoniac, I., Gheorghita, D.,... Niculescu, S.T. (2018). Influence of the Bone Cements Processing on the Mechanical Properties in Cranioplasty. Revista de Chimie, 69(4), 990-993. https://doi.org/10.37358/RC.18.4.6243

Harvard
Rivis, M., Pricop, M., Talpos, S., Ciocoiu, R., Antoniac, I., Gheorghita, D., Trante, O., Moldovan, H., Grigorescu, G., Seceleanu, V., Mohan, A., Niculescu, S.T. (2018). 'Influence of the Bone Cements Processing on the Mechanical Properties in Cranioplasty', Revista de Chimie, 69(4), pp. 990-993. https://doi.org/10.37358/RC.18.4.6243

IEEE
M. Rivis, M. Pricop, S. Talpos, R. Ciocoiu, I. Antoniac, D. Gheorghita, O. Trante, H. Moldovan, G. Grigorescu, V. Seceleanu, A. Mohan, S.T. Niculescu, "Influence of the Bone Cements Processing on the Mechanical Properties in Cranioplasty". Revista de Chimie, vol. 69, no. 4, pp. 990-993, 2018. [online]. https://doi.org/10.37358/RC.18.4.6243

Text
Mircea Rivis, Marius Pricop, S. Talpos, Robert Ciocoiu, Iulian Antoniac, Daniela Gheorghita, Octavian Trante, Horatiu Moldovan, Gabriel Grigorescu, Vicentiu Seceleanu, Aurel Mohan, Serban Talpos Niculescu,
Influence of the Bone Cements Processing on the Mechanical Properties in Cranioplasty,
Revista de Chimie,
Volume 69, Issue 4,
2018,
Pages 990-993,
ISSN 2668-8212,
https://doi.org/10.37358/RC.18.4.6243.
(https://revistadechimie.ro/Articles.asp?ID=6243)
Keywords: bone cement; PMMA; flexural strength; surface wetting

RIS
TY - JOUR
T1 - Influence of the Bone Cements Processing on the Mechanical Properties in Cranioplasty
A1 - Rivis, Mircea
A2 - Pricop, Marius
A3 - Talpos, S.
A4 - Ciocoiu, Robert
A5 - Antoniac, Iulian
A6 - Gheorghita, Daniela
A7 - Trante, Octavian
A8 - Moldovan, Horatiu
A9 - Grigorescu, Gabriel
A10 - Seceleanu, Vicentiu
A11 - Mohan, Aurel
A12 - Niculescu, Serban Talpos
JF - Revista de Chimie
JO - Rev. Chim.
PB - Revista de Chimie SRL
SN - 2668-8212
Y1 - 2018
VL - 69
IS - 4
SP - 990
EP - 993
UR - https://doi.org/10.37358/RC.18.4.6243
KW - bone cement
KW - PMMA
KW - flexural strength
KW - surface wetting
ER -

BibTex
@article{RevCh2018P990,
author = {Rivis Mircea and Pricop Marius and Talpos S. and Ciocoiu Robert and Antoniac Iulian and Gheorghita Daniela and Trante Octavian and Moldovan Horatiu and Grigorescu Gabriel and Seceleanu Vicentiu and Mohan Aurel and Niculescu Serban Talpos},
title = {Influence of the Bone Cements Processing on the Mechanical Properties in Cranioplasty},
journal = {Revista de Chimie},
volume = {69},
number = {4},
pages = {990-993},
year = {2018},
issn = {2668-8212},
doi = {https://doi.org/10.37358/RC.18.4.6243},
url = {https://revistadechimie.ro/Articles.asp?ID=6243}
}

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template

* Ethical Statement

* Paper Submission

Ghidul Autorului (ro)

Open Access & Archiving Policy

Search Authors

LATEST NEWS
	NUMAR OMAGIAL PETRU PONI.. detalii
	Revista de Chimie - 70 de ani de aparitie neintrerupta.. detalii
	English-Romanian Dictionary for Mechanical Engineering (download pdf)