Influence of the Process for Obtaining Massive Amorphous Materials on the Defects of the Structure in the Alloy Fe61+xCo10-xY8W1B20 , where x = 0 or 1

Nabialek, Marcin; Jez, Bartlomiej; Jez, Kinga

Marcin Nabialek, Bartlomiej Jez, Kinga Jez

Influence of the Process for Obtaining Massive Amorphous Materials on the Defects of the Structure in the Alloy Fe61+xCo10-xY8W1B20 , where x = 0 or 1

Abstract:

As part of the work, a rapid cooled alloy was produced with the chemical composition Fe61+xCo10-xY8W1B20, where: x = 0 or 1 using two methods, suction in and injecting the molten alloy into the copper mold. The material was obtained in the form of 10 mm x 5 mm x 0.5 mm plates. Studies on the structure of the obtained alloys were carried out using X-ray diffraction. Obtained X-ray diffraction images are typical for amorphous materials. Using the vibration magnetometer, static magnetic hysteresis loops and primary magnetization curves were measured. The produced samples are characterized by a saturation value above 1T and a coercive field value below 200 A/m. Based on the theory of H. Kronmüller, numerical analysis of the curves of the original magnetization was carried out. It has been found that the process of magnetizing the produced materials has defects of the amorphous structure in the form of pseudo-location dipoles and free volumes. In addition, the spin wave stiffness parameter was determined.

Keywords:
amorphous alloy; chemical composition; defects; static magnetic hysteresis; X-ray diffraction

Issue: 2018, Volume 69, Issue 9

Pages: 2546-255

Publication date: 2018/10/15

https://doi.org/10.37358/RC.18.9.6573

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
NABIALEK, M., JEZ, B., JEZ, K., Influence of the Process for Obtaining Massive Amorphous Materials on the Defects of the Structure in the Alloy Fe61+xCo10-xY8W1B20 , where x = 0 or 1, Rev. Chim., 69(9), 2018, 2546-255.

Vancouver
Nabialek M, Jez B, Jez K. Influence of the Process for Obtaining Massive Amorphous Materials on the Defects of the Structure in the Alloy Fe61+xCo10-xY8W1B20 , where x = 0 or 1. Rev. Chim.[internet]. 2018 Sep;69(9):2546-255. Available from: https://doi.org/10.37358/RC.18.9.6573

APA 6th edition
Nabialek, M., Jez, B. & Jez, K. (2018). Influence of the Process for Obtaining Massive Amorphous Materials on the Defects of the Structure in the Alloy Fe61+xCo10-xY8W1B20 , where x = 0 or 1. Revista de Chimie, 69(9), 2546-255. https://doi.org/10.37358/RC.18.9.6573

Harvard
Nabialek, M., Jez, B., Jez, K. (2018). 'Influence of the Process for Obtaining Massive Amorphous Materials on the Defects of the Structure in the Alloy Fe61+xCo10-xY8W1B20 , where x = 0 or 1', Revista de Chimie, 69(9), pp. 2546-255. https://doi.org/10.37358/RC.18.9.6573

IEEE
M. Nabialek, B. Jez, K. Jez, "Influence of the Process for Obtaining Massive Amorphous Materials on the Defects of the Structure in the Alloy Fe61+xCo10-xY8W1B20 , where x = 0 or 1". Revista de Chimie, vol. 69, no. 9, pp. 2546-255, 2018. [online]. https://doi.org/10.37358/RC.18.9.6573

Text
Marcin Nabialek, Bartlomiej Jez, Kinga Jez,
Influence of the Process for Obtaining Massive Amorphous Materials on the Defects of the Structure in the Alloy Fe61+xCo10-xY8W1B20 , where x = 0 or 1,
Revista de Chimie,
Volume 69, Issue 9,
2018,
Pages 2546-255,
ISSN 2668-8212,
https://doi.org/10.37358/RC.18.9.6573.
(https://revistadechimie.ro/Articles.asp?ID=6573)
Keywords: amorphous alloy; chemical composition; defects; static magnetic hysteresis; X-ray diffraction

RIS
TY - JOUR
T1 - Influence of the Process for Obtaining Massive Amorphous Materials on the Defects of the Structure in the Alloy Fe61+xCo10-xY8W1B20 , where x = 0 or 1
A1 - Nabialek, Marcin
A2 - Jez, Bartlomiej
A3 - Jez, Kinga
JF - Revista de Chimie
JO - Rev. Chim.
PB - Revista de Chimie SRL
SN - 2668-8212
Y1 - 2018
VL - 69
IS - 9
SP - 2546
EP - 255
UR - https://doi.org/10.37358/RC.18.9.6573
KW - amorphous alloy
KW - chemical composition
KW - defects
KW - static magnetic hysteresis
KW - X-ray diffraction
ER -

BibTex
@article{RevCh2018P2546,
author = {Nabialek Marcin and Jez Bartlomiej and Jez Kinga},
title = {Influence of the Process for Obtaining Massive Amorphous Materials on the Defects of the Structure in the Alloy Fe61+xCo10-xY8W1B20 , where x = 0 or 1},
journal = {Revista de Chimie},
volume = {69},
number = {9},
pages = {2546-255},
year = {2018},
issn = {2668-8212},
doi = {https://doi.org/10.37358/RC.18.9.6573},
url = {https://revistadechimie.ro/Articles.asp?ID=6573}
}

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template

* Ethical Statement

* Paper Submission

Ghidul Autorului (ro)

Open Access & Archiving Policy

Search Authors

LATEST NEWS
	NUMAR OMAGIAL PETRU PONI.. detalii
	Revista de Chimie - 70 de ani de aparitie neintrerupta.. detalii
	English-Romanian Dictionary for Mechanical Engineering (download pdf)