Constructive Optimisation of the Propeller Type Mixing Devices Using the Virtual and Rapid Prototyping

Besnea, Daniel; Spanu, Alina; Prodea, Iuliana Marlena; Tomescu, Gheorghita; Panait, Iolanda Constanta

Daniel Besnea, Alina Spanu, Iuliana Marlena Prodea, Gheorghita Tomescu, Iolanda Constanta Panait

Constructive Optimisation of the Propeller Type Mixing Devices Using the Virtual and Rapid Prototyping

Abstract:

The paper points out the advantages of rapid prototyping for improving the performances/constructive optimization of mixing devices used in process industries, here exemplified to propeller types ones. The multidisciplinary optimization of the propeller profile affords its design using parametric CAD methods. Starting from the mathematical curve equations proposed for the blade profile, it was determined its three-dimensional virtual model. The challenge has been focused on the variation of propeller pitch and external diameter. Three dimensional ranges were manufactured using the additive manufacturing process with Marker Boot 3D printer. The mixing performances were tested on the mixing equipment measuring the minimum rotational speed and the correspondent shaft torque for complete suspension achieved for each of the three models. The virtual and rapid prototyping method is newly proposed by the authors to obtain the basic data for scale up of the mixing systems, in the case of flexible production (of low quantities), in which both the nature and concentration of the constituents in the final product varies often. It is an efficient and low cost method for the rapid identification of the optimal mixing device configuration, which contributes to the costs reduction and to the growing of the output.

Keywords:
constructive optimisation; virtual and rapid prototyping; propeller CAD design; mixing devices performances

Issue: 2017, Volume 68, Issue 3

Pages: 453-458

Publication date: 2017/4/15

https://doi.org/10.37358/RC.17.3.5477

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
BESNEA, D., SPANU, A., PRODEA, I.M., TOMESCU, G., PANAIT, I.C., Constructive Optimisation of the Propeller Type Mixing Devices Using the Virtual and Rapid Prototyping, Rev. Chim., 68(3), 2017, 453-458.

Vancouver
Besnea D, Spanu A, Prodea IM, Tomescu G, Panait IC. Constructive Optimisation of the Propeller Type Mixing Devices Using the Virtual and Rapid Prototyping. Rev. Chim.[internet]. 2017 Mar;68(3):453-458. Available from: https://doi.org/10.37358/RC.17.3.5477

APA 6th edition
Besnea, D., Spanu, A., Prodea, I.M., Tomescu, G. & Panait, I.C. (2017). Constructive Optimisation of the Propeller Type Mixing Devices Using the Virtual and Rapid Prototyping. Revista de Chimie, 68(3), 453-458. https://doi.org/10.37358/RC.17.3.5477

Harvard
Besnea, D., Spanu, A., Prodea, I.M., Tomescu, G., Panait, I.C. (2017). 'Constructive Optimisation of the Propeller Type Mixing Devices Using the Virtual and Rapid Prototyping', Revista de Chimie, 68(3), pp. 453-458. https://doi.org/10.37358/RC.17.3.5477

IEEE
D. Besnea, A. Spanu, I.M. Prodea, G. Tomescu, I.C. Panait, "Constructive Optimisation of the Propeller Type Mixing Devices Using the Virtual and Rapid Prototyping". Revista de Chimie, vol. 68, no. 3, pp. 453-458, 2017. [online]. https://doi.org/10.37358/RC.17.3.5477

Text
Daniel Besnea, Alina Spanu, Iuliana Marlena Prodea, Gheorghita Tomescu, Iolanda Constanta Panait,
Constructive Optimisation of the Propeller Type Mixing Devices Using the Virtual and Rapid Prototyping,
Revista de Chimie,
Volume 68, Issue 3,
2017,
Pages 453-458,
ISSN 2668-8212,
https://doi.org/10.37358/RC.17.3.5477.
(https://revistadechimie.ro/Articles.asp?ID=5477)
Keywords: constructive optimisation; virtual and rapid prototyping; propeller CAD design; mixing devices performances

RIS
TY - JOUR
T1 - Constructive Optimisation of the Propeller Type Mixing Devices Using the Virtual and Rapid Prototyping
A1 - Besnea, Daniel
A2 - Spanu, Alina
A3 - Prodea, Iuliana Marlena
A4 - Tomescu, Gheorghita
A5 - Panait, Iolanda Constanta
JF - Revista de Chimie
JO - Rev. Chim.
PB - Revista de Chimie SRL
SN - 2668-8212
Y1 - 2017
VL - 68
IS - 3
SP - 453
EP - 458
UR - https://doi.org/10.37358/RC.17.3.5477
KW - constructive optimisation
KW - virtual and rapid prototyping
KW - propeller CAD design
KW - mixing devices performances
ER -

BibTex
@article{RevCh2017P453,
author = {Besnea Daniel and Spanu Alina and Prodea Iuliana Marlena and Tomescu Gheorghita and Panait Iolanda Constanta},
title = {Constructive Optimisation of the Propeller Type Mixing Devices Using the Virtual and Rapid Prototyping},
journal = {Revista de Chimie},
volume = {68},
number = {3},
pages = {453-458},
year = {2017},
issn = {2668-8212},
doi = {https://doi.org/10.37358/RC.17.3.5477},
url = {https://revistadechimie.ro/Articles.asp?ID=5477}
}

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template

* Ethical Statement

* Paper Submission

Ghidul Autorului (ro)

Open Access & Archiving Policy

Search Authors

LATEST NEWS
	NUMAR OMAGIAL PETRU PONI.. detalii
	Revista de Chimie - 70 de ani de aparitie neintrerupta.. detalii
	English-Romanian Dictionary for Mechanical Engineering (download pdf)