ABOUT INDEXING BOARD ARCHIVES AUTHOR GUIDELINES SUBMIT PAPER AUTHORS'S PAGE NEWS, EVENTS
REVISTA DE CHIMIE
Cite as: Rev. Chim.
https://doi.org/10.37358/Rev.Chim.1949

OSIM Nr. R102355
ISSN Print 0034-7752
ISSN Online 2668-8212
Journal Metrics
* Impact Factor 2018-19: 1.605
* 5-Year IF: 1.34
* CiteScore: 1.23
* SNIP: 0.710
* SJR: 0.294
(academic-accelerator.com)

REVISTA DE CHIMIE Latest Issue

LATEST ISSUE >>>

   Volume 71, 2020
   Volume 70, 2019
   Volume 69, 2018
   Volume 68, 2017
   Volume 67, 2016
   Volume 66, 2015
   Volume 65, 2014
   Volume 64, 2013
   Volume 63, 2012
   Volume 62, 2011
   Volume 61, 2010
   Volume 60, 2009
   Volume 59, 2008
   Volume 58, 2007
   Volume 57, 2006
   Volume 56, 2005
   Volume 55, 2004
   Volume 54, 2003
   Volume 53, 2002
 
<<<< back

Revista de Chimie (Rev. Chim.), Year 2019, Volume 70, Issue 12, 4366-4371

https://doi.org/10.37358/RC.19.12.7759

Diana Lacatusu, Mihaela Baican, Florina Crivoi, Alina Monica Miftode

Comparative Studies of Work-developing Capacity of Shape Memory Alloys (SMA) and Polymers

Abstract:

The thermodynamic and work-generating behaviours of a Cu-14.86 Zn-5.81 Al (mass. %) shape memory alloy (SMA) and a three-layer PET heat shrinkable sheath were comparatively discussed. The experimental CuZnAl SMA under study experienced a reversible martensitic transformation and was able to lift over 4.8 mm, during heating-cooling cycles, a load which was 463 times heavier than the specimen. During heating, the PET fragments underwent up to three glass transitions and the PET ring-shaped specimens were able to lift over 3 mm, a load which was 1571 times heavier. By comparing the work generating capacity of CuZnAl SMA and PET heat shrinkable sheath, defined as the ratio between total absorbed enthalpy and specific work output, it was found out that the former has been ten times less effective than the latter.
Keywords:
shape memory alloy; heat-shrinkable sheath; work-generating shape memory effect; martensitic transformation; glass transition

Issue: 2019, Volume 70, Issue 12
Pages: 4366-4371
Publication date: 20/01/2020
https://doi.org/10.37358/RC.19.12.7759
download pdf   Download Pdf Article
Creative Commons License
This article is published under the Creative Commons Attribution 4.0 International License
Citation Styles
Cite this article as:
LACATUSU, D., BAICAN, M., CRIVOI, F., MIFTODE, A.M., Comparative Studies of Work-developing Capacity of Shape Memory Alloys (SMA) and Polymers, Rev. Chim., 70(12), 2019, 4366-4371.

Vancouver
Lacatusu D, Baican M, Crivoi F, Miftode AM. Comparative Studies of Work-developing Capacity of Shape Memory Alloys (SMA) and Polymers. Rev. Chim.[internet]. 2019 Dec;70(12):4366-4371. Available from: https://doi.org/10.37358/RC.19.12.7759


APA 6th edition
Lacatusu, D., Baican, M., Crivoi, F. & Miftode, A.M. (2019). Comparative Studies of Work-developing Capacity of Shape Memory Alloys (SMA) and Polymers. Revista de Chimie, 70(12), 4366-4371. https://doi.org/10.37358/RC.19.12.7759


Harvard
Lacatusu, D., Baican, M., Crivoi, F., Miftode, A.M. (2019). 'Comparative Studies of Work-developing Capacity of Shape Memory Alloys (SMA) and Polymers', Revista de Chimie, 70(12), pp. 4366-4371. https://doi.org/10.37358/RC.19.12.7759


IEEE
D. Lacatusu, M. Baican, F. Crivoi, A.M. Miftode, "Comparative Studies of Work-developing Capacity of Shape Memory Alloys (SMA) and Polymers". Revista de Chimie, vol. 70, no. 12, pp. 4366-4371, 2019. [online]. https://doi.org/10.37358/RC.19.12.7759


Text
Diana Lacatusu, Mihaela Baican, Florina Crivoi, Alina Monica Miftode,
Comparative Studies of Work-developing Capacity of Shape Memory Alloys (SMA) and Polymers,
Revista de Chimie,
Volume 70, Issue 12,
2019,
Pages 4366-4371,
ISSN 2668-8212,
https://doi.org/10.37358/RC.19.12.7759.
(https://revistadechimie.ro/Articles.asp?ID=7759)
Keywords: shape memory alloy; heat-shrinkable sheath; work-generating shape memory effect; martensitic transformation; glass transition


RIS
TY - JOUR
T1 - Comparative Studies of Work-developing Capacity of Shape Memory Alloys (SMA) and Polymers
A1 - Lacatusu, Diana
A2 - Baican, Mihaela
A3 - Crivoi, Florina
A4 - Miftode, Alina Monica
JF - Revista de Chimie
JO - Rev. Chim.
PB - Revista de Chimie SRL
SN - 2668-8212
Y1 - 2019
VL - 70
IS - 12
SP - 4366
EP - 4371
UR - https://doi.org/10.37358/RC.19.12.7759
KW - shape memory alloy
KW - heat-shrinkable sheath
KW - work-generating shape memory effect
KW - martensitic transformation
KW - glass transition
ER -


BibTex
@article{RevCh2019P4366,
author = {Lacatusu Diana and Baican Mihaela and Crivoi Florina and Miftode Alina Monica},
title = {Comparative Studies of Work-developing Capacity of Shape Memory Alloys (SMA) and Polymers},
journal = {Revista de Chimie},
volume = {70},
number = {12},
pages = {4366-4371},
year = {2019},
issn = {2668-8212},
doi = {https://doi.org/10.37358/RC.19.12.7759},
url = {https://revistadechimie.ro/Articles.asp?ID=7759}
}
 
Views number: 56    |     Downloads number: 0  
<<<< back
 
PUBLISHING SECTION
Author Guidelines
 * Paper Drafting
 * Paper Template
 * Ethical Statement
 * Paper Submission
 * Author Payments
Ghidul Autorului (ro)
Submit Paper
Author's Page
Publishing Ethics
Open Access Policy
 Search Authors
 LATEST NEWS
REvista de Chimie Revista de Chimie - 70 de ani de aparitie neintrerupta.. detalii
dictionar English-Romanian Dictionary for Mechanical Engineering
(download pdf)
  News, Events
Crossref Member Badge
 DOI  logo
 Gold Open Access | Source=http://www.plos.org/  | Author=art designer at PLoS
Creative Commons License
 Conferences of Contemporary
 Chemistry
 Biblioteca Chimiei
 Materiale Plastice