Plastic Flow Verification in a Tool Cavity for Production of Test Sample for Wettability Solders Measurement

Kapustova, Maria; Kolenak, Roman; Sobota, Robert; Bilik, Jozef; Simna, Vladimir; Ridzon, Martin; Borzan, Cristina Stefana Miron

Maria Kapustova, Roman Kolenak, Robert Sobota, Jozef Bilik, Vladimir Simna, Martin Ridzon, Cristina Stefana Miron Borzan

Plastic Flow Verification in a Tool Cavity for Production of Test Sample for Wettability Solders Measurement

Abstract:

The paper describes the structural design, simulation and proper manufacture of a tool for manufacturing of test samples in spherical form. This shape is essential for an innovative assessment of solder wettability, since the small sphere by its ideal shape represents the total non-wettability of substrate surface. In order to verify the design of the shaping tool, a simulation software, type Deform was used, which allowed the FEM analysis of plastic flow in the tool cavity. Just after successful computer simulation, a shaping tool was designed and then manufactured in laboratory conditions, thus the fabrication of test samples in spherical form was successfully tested.

Keywords:
soldering; wettability; solder; sample in spherical form; forming tool; optimization of semi-finished product; FEM analysis

Issue: 2020, Volume 71, Issue 1

Pages: 107-112

Publication date: 2020/2/7

https://doi.org/10.37358/RC.20.1.7820

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
KAPUSTOVA, M., KOLENAK, R., SOBOTA, R., BILIK, J., SIMNA, V., RIDZON, M., BORZAN, C.S.M., Plastic Flow Verification in a Tool Cavity for Production of Test Sample for Wettability Solders Measurement, Rev. Chim., 71(1), 2020, 107-112.

Vancouver
Kapustova M, Kolenak R, Sobota R, Bilik J, Simna V, Ridzon M, Borzan CSM. Plastic Flow Verification in a Tool Cavity for Production of Test Sample for Wettability Solders Measurement. Rev. Chim.[internet]. 2020 Jan;71(1):107-112. Available from: https://doi.org/10.37358/RC.20.1.7820

APA 6th edition
Kapustova, M., Kolenak, R., Sobota, R., Bilik, J., Simna, V., Ridzon, M. & Borzan, C.S.M. (2020). Plastic Flow Verification in a Tool Cavity for Production of Test Sample for Wettability Solders Measurement. Revista de Chimie, 71(1), 107-112. https://doi.org/10.37358/RC.20.1.7820

Harvard
Kapustova, M., Kolenak, R., Sobota, R., Bilik, J., Simna, V., Ridzon, M., Borzan, C.S.M. (2020). 'Plastic Flow Verification in a Tool Cavity for Production of Test Sample for Wettability Solders Measurement', Revista de Chimie, 71(1), pp. 107-112. https://doi.org/10.37358/RC.20.1.7820

IEEE
M. Kapustova, R. Kolenak, R. Sobota, J. Bilik, V. Simna, M. Ridzon, C.S.M. Borzan, "Plastic Flow Verification in a Tool Cavity for Production of Test Sample for Wettability Solders Measurement". Revista de Chimie, vol. 71, no. 1, pp. 107-112, 2020. [online]. https://doi.org/10.37358/RC.20.1.7820

Text
Maria Kapustova, Roman Kolenak, Robert Sobota, Jozef Bilik, Vladimir Simna, Martin Ridzon, Cristina Stefana Miron Borzan,
Plastic Flow Verification in a Tool Cavity for Production of Test Sample for Wettability Solders Measurement,
Revista de Chimie,
Volume 71, Issue 1,
2020,
Pages 107-112,
ISSN 2668-8212,
https://doi.org/10.37358/RC.20.1.7820.
(https://revistadechimie.ro/Articles.asp?ID=7820)
Keywords: soldering; wettability; solder; sample in spherical form; forming tool; optimization of semi-finished product; FEM analysis

RIS
TY - JOUR
T1 - Plastic Flow Verification in a Tool Cavity for Production of Test Sample for Wettability Solders Measurement
A1 - Kapustova, Maria
A2 - Kolenak, Roman
A3 - Sobota, Robert
A4 - Bilik, Jozef
A5 - Simna, Vladimir
A6 - Ridzon, Martin
A7 - Borzan, Cristina Stefana Miron
JF - Revista de Chimie
JO - Rev. Chim.
PB - Revista de Chimie SRL
SN - 2668-8212
Y1 - 2020
VL - 71
IS - 1
SP - 107
EP - 112
UR - https://doi.org/10.37358/RC.20.1.7820
KW - soldering
KW - wettability
KW - solder
KW - sample in spherical form
KW - forming tool
KW - optimization of semi-finished product
KW - FEM analysis
ER -

BibTex
@article{RevCh2020P107,
author = {Kapustova Maria and Kolenak Roman and Sobota Robert and Bilik Jozef and Simna Vladimir and Ridzon Martin and Borzan Cristina Stefana Miron},
title = {Plastic Flow Verification in a Tool Cavity for Production of Test Sample for Wettability Solders Measurement},
journal = {Revista de Chimie},
volume = {71},
number = {1},
pages = {107-112},
year = {2020},
issn = {2668-8212},
doi = {https://doi.org/10.37358/RC.20.1.7820},
url = {https://revistadechimie.ro/Articles.asp?ID=7820}
}

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template

* Ethical Statement

* Paper Submission

Ghidul Autorului (ro)

Open Access & Archiving Policy

Search Authors

LATEST NEWS
	NUMAR OMAGIAL PETRU PONI.. detalii
	Revista de Chimie - 70 de ani de aparitie neintrerupta.. detalii
	English-Romanian Dictionary for Mechanical Engineering (download pdf)